Description

The Madison Metal Baluster has a Black Finish and offers a ‘double beaded’ design near the top and bottom of the baluster

How to go about Installing The Madison Metal Baluster:

Installing the Madison Metal Baluster will need a handrail and baserail with a 13mm groove.
Installing Madison Metal Spindle is best with a bracket.
If you decide on buying a grooved handrail and baserail, you must do the following:
Ensure the handrail and base rails come with a 13mm infill, and fit them into the groove like you would with wooden spindles.
Buying rake brackets to aid installation means you will need an ungrooved handrail and baserail
Purchase either rake brackets (MBRPB) or landing brackets (MBLPB) alongside the spindles depending on what you require.
(Buying this baluster will NOT include Brackets, so please purchase those separately).

The Richard Burbidge Black Metal spindles are Available in 6 different designs.

The manufacturing of the Madison Metal Spindle consists of a robust 1.3mm mild steel box section. The manufacturers have coated the spindle with zinc phosphate, protecting it against corrosion. Finally, the coating is doubled with a black powder and a hammered finish.

If you will use this baluster for landings, that’s fine! Make sure you’ve bought the correct handrails and base rails & they are secured in place with adhesive.